UHV-675 Penguji Viskositas Minyak Viskometer Kinematik Minyak Transformator Otomatis
Penguji viskositas kinematik otomatis UHV-675 digunakan untuk menguji nilai viskositas kinematik produk minyak bumi dan minyak cair lainnya. Ini menggunakan teknologi layar sentuh berwarna definisi tinggi, antarmuka kaya dan jelas, respons layar sentuh cepat dan fleksibel
Detail Produk Penguji Viskositas Minyak Viskometer Kinematik Minyak Transformator Otomatis UHV-675
Introduction:
Kinematic Viscometer for petroleum products, using high definition color touch screen technology, the interface is rich and clear, touch screen response is fast and flexible; Using large capacity memory chip, up to 2000 measurement results can be stored; The panel mounted thermal printer is used to automatically and quickly print the test results, sample number, test time, viscometer constant, pipe diameter, kinematic viscosity value and other information after the test.
Characteristics:
1、Precision Temperature Control: This automatic viscosity measuring instrument for petroleum products utilizes advanced fuzzy PID temperature control technology, delivering exceptional temperature stability with an accuracy of ±0.02°C.
2、Flexible Temperature Settings: It supports preset national standard temperature points (20°C, 40°C, 50°C, 80°C, 100°C) and allows custom temperature settings above ambient conditions with a resolution of 0.1°C. The device also functions as a standard constant-temperature water bath.
3、High-Efficiency Testing: Capable of simultaneously testing four glass capillary viscometers under constant temperature for kinematic viscosity measurement. Each viscometer can perform four repeated tests to form a complete dataset.
4、User-Friendly Interface: Equipped with a high-definition color touchscreen, the instrument features an intuitive, clear, and information-rich interface with fast and responsive touch controls.
5、Ample Data Storage: Integrated with a large-capacity memory chip, it can store up to 2,000 measurement results for easy tracking and retrieval.
6、Convenient Data Output: A built-in thermal printer allows for automatic and quick printing of test results immediately after completion.
Spesifikasi teknis
display
Layar LCD berwarna + layar sentuh
Rentang kendali suhu
Room temperature ~150°C
Atur suhu
20°C, 40°C, 50°C, 80°C, 100°C, any value (higher than room temperature ~150°C)
Constant temperature accuracy
Plus or minus 0.02°C
Heating power
Jumlah lubang uji
Rentang waktu
0~999 seconds (according to the national standard, the flow time of each test sample must be higher than 200 seconds)
Akurasi waktu
0.1s
Waktu waktu
1 to 4 times This parameter is optional
Kapasitas penyimpanan
2000 catatan tes
Printing mode
Panel mounted thermal printer
Sumber Daya listrik
AC220V±5% 50Hz±5%
kekuatan
1600W
Service ambient temperature
5°C ~ 35°C
Kelembaban sekitar
10%~80%
Attentions:
(1). When there is no water inside the aquarium, it prohibits power on.
(2). In the liquid of the bathtub, there can’t be impurities and floating materials in order to avoid to block the test holes. For the new bath liquid , it often appears bubbles when heating, which will affect the test, especially when it appears bubbles in the test holes, it will have the most serious affect. Please loose the capillary to check if there is bubble in the test holes. If it appears, please use the hose to blow in order to get rid of the bubbles or use the clean the toothbrush to wash off the bubbles.
(3). Before we use the apparatus, we must ensure the reliable earthing.
(4). When we re-start the apparatus, the interval of use need to be above 15 minutes. And the apparatus is started in the cold bath state, and it needs to be used after 45 minutes.
(5). When we rectify the temperature with the full-immersion thermometer, the effective scale of the thermometer can’t be exposed to the liquid level of the constant temperature bath.
(6). Prohibit to store or use the apparatus in the wet environment with the corrosive gas.
(7). When we clip the capillary, please note the height of upper opening and avoid to enter water in test tube.
(8). After use for a period or when we find the oil level measurement is insensitive, we should clean the test holes in the test clip in time.
(9). During using the apparatus, if appears fault, you should invite the professionals to repair and contact with us in time. If it’s quality problem, we can offer the gratuitous warranty within one year.
(10). For the power source, you must keep the good earthing.
Gedung 6, Taman Industri Optik-Mekanis Lembah Optik, Jalan 84 Gaoxin 5, Zona Pengembangan Teknologi Baru East Lake, Kota Wuhan, Provinsi Hubei, Tiongkok
